· Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching.
· Used among electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own kits. The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects.
· The hole on the bottom is designed for resistor kit, specifically for 330 Ω/10K Ω(We offer you 330 Ω and 10K Ω Metal Film Resistor). The hole on two sides is used providing power for the components on the Protoshield board(We offer you Mini Push Button and 3mm Green LED for testing).
· Made of glass fiber FR-4 material, having the ability of high heat resistance, corrosion resistance, mechanical strength, insulation.
· Standard IC spacing 2.54MM hole plated through among the pad, Components and kits can be mounted variously on your will.
Board Material: Glass Fiber FR4
Color: Blue, Gold
Hole pitch: 2.54mm
Hole diameter: 1mm
Size: 2.08 x 2.71 inch
Extension Clips: Yes (Can extend with other boards)
Input voltage: 6.5-12V (DC) or USB power supply
Output voltage: 3.3V/5V (Switchable)
Maximum output current: <700 mA
368 tie points total: 269 tie-point IC-circuit area plus 68 tie-point power rails and 19 tie-point for 330 ohm&10K Ohm resistance
Two roads are of independent control and can be switched to 0V, 3.3V or 5V.
4 x 368 tie-points ProtoShield Board
8 x Pin Header Kit of 20 Pins
8 x 3mm LED - Basic Green
8 x Mini Pushbutton Switch
10 x Metal Film Resistor 330 Ohm 1/4th Watt PTH
5 x Metal Film Resistor 10K Ohm 1/4th Watt PTH
Before using,to know that which pin of the components should be connected together,then insert the pin in the group of holes.And so on.