· This module is a tapless ZVS finished board with strong power and good quality.Fully symmetrical wiring, low-density component layout, better original heat dissipation.
· Made of military-grade 1.6MM double-sided glass fiber board, using factory-customized large inductance, high-quality magnetic ring with consistent parameters and more stable performance, and all the excessive current parts at the bottom of the circuit board are tinned. You can push the high voltage package and pull the arc.
· During the connection process, make sure that the connection is correct, the positive and negative poles of the power cord are not reversed, and the load (heating coil or high voltage package) is connected before powering on. No load can’t be energized, it will be damaged if no load is energized, and don’t turn on directly without load.
· During induction heating, because of the heat sink, it can be used longer than the ordinary mini ZVS. Note that if the temperature is too high, the power will be cut off to cool. Because the current is relatively large during induction heating, the heating of the coil is relatively large. When heating, part of the heat generated by the heated object will be transferred to the heating coil, and the temperature of the heating coil will be very high over time.
· Full symmetrical wiring, low-density component layout, the original heat better!
Product size: 150mm x 150mm x 100mm(59''59''39'')
Input voltage: DC 12V
Operating frequency: 20kHz
Use switching power supply, do not use ordinary power, do not use batteries, batteries, etc. At least a switching power supply above 12V10A
The power is too small, the response is slow, the actual use effect is related to the power supply, please use a high-quality power supply
Voltage: 12V maximum not more than 20V
Current: 20A, no more than 25A